NETGEAR Orbi WiFi 6 Mesh System (RBK853) | Mesh WiFi 6 Router with 2 Satellite Extenders | WiFi Mesh System | Whole Home Mesh Network AX6000 Triband Coverage up to 7,500 sq ft and 100 Devices

Product Information

The Orbi Mobile a phone app is used to set up the Wi-Fi networking. You can also use this application to run speed tests, manage Netgear subscription services, see what devices are currently connected and more. Support The two Netgear Orbi Whole Home Tri-Band Mesh Wi-Fi 6 Systems have the same system requirements, which you can find below:

One (1) 10Gbps Multi-Gigabit Ethernet WAN port, One (1) 2.5Gbps Multi-Gigabit Ethernet LAN port, Three (3) 1Gbps Gigabit Ethernet LAN ports Netgear has two similar Orbi Whole Home Tri-Band Mesh Wi-Fi 6 Systems with the RBK753 and RBK853 models. So, what are the main differences between these two products? One (1) 2.5Gbps multi-Gigabit Ethernet WAN port, Four (4) 10/100/1000Mbps Gigabit Ethernet LAN portsI got smart and switched the satellites. Interestingly, the satellite I brought to the basement from the second floor, which previously never had a problem, began to display this behavior.

The RBK753 is capable of supporting 8 simultaneous streams while the RBK753 is capable of supporting 12 streams at the same time. Router and Satellites Processor Is there anyone who has experience with Cisco's AnyConnect on an Orbi mesh network, that has noticed similar issues? As was the case with the original system, the Netgear Orbi Wi-Fi 6 RBK852 is set up and managed through the Orbi app. As well as making it easy to get going, the app also provides remote access to the router – handy, if you need to reboot the router while you’re out and about.Each router and satellite unit of the RBK753 mesh system comes with six internal antennas with amplifiers. The router and satellite unit of the RBK853 mesh system each comes with eight internal antennas with amplifiers. Router Ports

The satellite on the second floor has nothing hard-wired to it except ethernet in from the router. The satellite in the basement has ethernet in from the router, and three ethernet out connections, one of which goes to my workstation for work. As is common with mesh systems, the Netgear Orbi Wi-Fi 6 RBK852 presents both networks under the same name. Devices are then pushed towards the best band based on performance and capability. Fast roaming also ensures devices are pushed to connect to the closest satellite to ensure the best performance on devices that can be moved, such as laptops and mobile phones. It is clear as "If you do need help, the support that Netgear provides is excellent. “, is an outright lie. Their support is a call center oversees that simply knows a set number of SIMPLE troubleshooting and that is it. The Orbi RBK852 uses Qualcomm’s newest Networking Pro 1200 Wi-Fi chip with 1GB of RAM and 512MB of capacity for storing firmware and settings. It’s all powered by a quad-core processor that runs at a maximum of 2GHz. It has an AX6000 rating. If your internet service provider gives you enough speed for both of these devices, we recommend getting the RBK853 as you can take advantage of the extra bandwidth to get faster Wi-Fi speeds in addition to having more connected devices and simultaneous streams. RBK753 vs. RBK853 Comparison ChartHave you ever tried to connect to routerlogin.net when you are on an exogenous VPN via Cisco for work? It makes me think that when a computer that is hard-wired into the satellite establishes such a connection, it causes the satellite to think it is no longer a part of the home router's network.

As you can see from the graph below, the new Orbi Wi-Fi 6 is far faster than the previous model, the RBK50.With just the RBR850 router set up, it moved 883.6Mbps to the receiving device 15-feet away. While this is off the pace set by high-performance routers, like the Netgear Nighthawk AX8 (RAX80) (at 1.389Gbps), it easily beat out other mesh kits, like the TP-Link Deco X20 (at 622.1Mbps) and the Arris SURFboard mAX Pro (at 820.3Mbps).